 | ||||||
Wall Sleeve
Refrigerant Tubing, Wiring and Drain Hose
Outdoor Unit
After drilling a 2-1/2" hole:
(1) Insert wall sleeve through hole and hang the indoor unit. The indoor unit is longer than the bracket and will hide the hole.
(2) Install interconnecting refrigerant tubings, electric wiring and draing tubing through the opening of wall sleeve and seal with putty.
(3) Connect wiring to properly marked terminals and connect refrigerant tubing flare fittings.
Easy Installation, Requires (1) One Power Supply to the Outdoor Unit Only
12,000 Btu Model Uses a 120 Volt Power Supply
18,000 Btu and 24,000 Btu Models Use a 208/230 Volt Power Supply
The Outdoor Unit Supplies Power to the Indoor Unit using 4-16 gauge wires
12,000 Btu Model Uses a 120 Volt Power Supply
18,000 Btu and 24,000 Btu Models Use a 208/230 Volt Power Supply
The Outdoor Unit Supplies Power to the Indoor Unit using 4-16 gauge wires
A Certified EPA Technican will be Required for Inspection and Start-Up
After drilling a 2-1/2" hole and connecting refrigerant and drain tubing, (4)-16 gauge wires (provided), will be installed
between the indoor unit and outdoor unit
Value
Close Out Window to Return
Ambiance High Efficiency
Air Conditioner Heat Pump
Special
Special
Order Now While Supply Last
1.800.856.9158
Save While Supply Last
1.800.856.9158
